top of page


System Control and Amplification

The VHD2000 is the control and amplification unit for the VHD2.0. It is a three-way, rack-mounted unit containing high-frequency, mid-frequency, and mid-bass amplifiers. It also houses all processing and control electronics for the subwoofer system. Our own hybrid signal processing utilizes the very best technology available from both the analog and digital worlds to offer complete audio system control, equalization, overdrive protection, thermal protection, and user-adjustable setup parameters. Time alignment and phase correction are done via KV2’s new 20MHz digital delay line, boasting the highest sampling rate of any digital speaker processor available. Once the set-up process is completed, the VHD2000 manages all system functions and assures optimal performance.


  • Three-way modular, 2900W Control and Amplification System for use specifically with VHD series modules

  • High Frequency, 300W, Class AB, push-pull low intermodulation amplifier with transformer-balanced outputs

  • Mid Frequency, 1000W, high efficiency, wide power bandwidth amplifier

  • Mid Bass, 1600W, high efficiency, current enhancing switching amplifier

  • The setup provides two channel selection and control of different VHD subwoofer combinations, or full range mode, with level control +/- 6dB and two rear-mounted line-level subwoofer outputs to feed a VHD 3200 subwoofer amplifier

  • Complete onboard speaker management system, including equalization, time alignment, crossover filters, amplifier overdrive protection, system set-up, and output level controls

  • Newly developed PDM 20MHz sampling, digital delay alignment system sets new standards for audio performance and dramatically increasing phase response precision and definition

  • AC soft-start circuitry with ON/OFF AC breaker switch provides thorough power protection

  • Comprehensive front-to-back cooling system features chassis sealed pcb’s for improved reliability

  • Two per side switch engages a specific set of filters and operating parameters for larger scale events when using an extra VHD2000 and VHD2.0 per side

  • Individual signal inserts for Mid/High, Subwoofer A, and Subwoofer B providing flexibility for insertion of signal processing or feeding from auxiliary sources as required

  • Front panel Input Impedance selector provides a selection of optimal input impedance when used with a KV2 Audio LD4 Line Driver


Specifically designed as the amplification and control elements for the VHD loudspeaker systems in a full rack mount module

  • Portable PA

  • Fixed installations

Output Channels

Number of Channels1

High-Frequency Amplifier Specification

Type: Class AB Push-Pull low IM Mosfet design, transformer balanced output

Rated Continuous Power: 300W

Distortion: < 0.05%

Operating Bandwidth: 2.2kHz to 30kHz

Mid Frequency Amplifier Specification

Type: High Efficiency, High power bandwidth

Rated Continuous Power: 1000W

Distortion: < 0.05%

Operating Bandwidth: 450Hz to 2.2kHz

Mid Bass Frequency Amplifier Specification

Type: High efficiency, Low frequency, Current-enhancing switch mode

Rated Continuous Power: 1600W

Distortion: < 0.05%

Operating Bandwidth: 100Hz to 450Hz

Signal Input

Input Sensitivity: 1.0V RMS

Input Impedance: 10kΩ to 50Ω "Line-driver-ready"

Signal Output: Main Through OUT, Sub A and B OUT

Insert: Mid/High, Sub A, Sub B

Speaker Output

Speaker Output: AP6


Input Level Control: +/- 6dB

Subwoofer Level Control: Sub A +/- 6dB, Sub B +/- 6dB

System setup: 6x

Full Range Mode: VHD2.0: 60Hz to 22kHz, Sub MUTE

Two per Side switch: Double system - EQ

Power Requirements

Power Connector: Neutrik PowerCon®

Operating Voltage: 115V / 230V / 250V

Operating Voltage Range: 100 to120V@60Hz | 205 to 240V@50Hz | 225 to 260V@50Hz

Recommended Amperage: 20A 115V | 10A 230V | 10A 250V

Soft Start: YES

Protection: Thermal breaker

Cooling: 2 x temperature-controlled fans

Physical Dimensions

Height: 177 mm (7.0")

Width: 481.4 mm (18.9")

Depth: 455.3 mm (17.9")

Weight: 30 kg (66lbs)

Product code

  • KVV 987 177 - VHD2000 250V

  • KVV 987 081 - VHD2000 230V

  • KVV 987 082 - VHD2000 115V

bottom of page