VHD3200D
Amplifier with Control and Diagnostics Tool
The VHD3200D is a rack-mounted subwoofer amplifier. The unit contains two separate 1600-watt amplifiers with individual power supplies, signal paths, and inputs and outputs within a single four-rack space chassis. The unit can be used in bridged mode to provide full power for one channel mode. The unit acts as a slave for the VHD2000D, which provides audio and control signals. It can also be used with the EPAK2500/R when used in combination with KV2 Audio ES systems and power the associated ES subwoofer systems. The VHD3200D is now configurable remotely using KV2 Control and Diagnostics Tool.
Features
Two-channel 3200W, Control and Amplification System for use specifically with VHD series subwoofers
Bridge mode facility
Two individual 1600W, high efficiency, current enhancing switching amplifiers with separate Input and output
Two individual transformers and power supply circuits for increased reliability and improved power delivery
Onboard amplifier overdrive protection
AC soft-start circuitry with two individual ON/OFF AC breaker switches providing thorough power protection.
Comprehensive front-to-back cooling system features chassis sealed pcb’s for improved reliability.
Configurable remotely using KV2 Control and Diagnostics Tool.
Applications
Specifically designed to drive all VHD, ES, SL subwoofer elements as part of the VHD and ES systems in a full rack mount module with Control and Diagnostics Tool
Portable PA
Fixed installations
Output Channels
Number of Channels: 2
Out. Power 4Ω - 1 channel / 2 channels loaded: 1600W / 1600W (RMS)
Out. Power 8Ω - bridged: 3200W (RMS)
Low-Frequency Amplifier Specification
Type: High efficiency, Low frequency, Current-enhancing switch mode
Distortion: < 0.05%
Operating Bandwidth: 20Hz to 100Hz
Signal Input
Input Sensitivity: 1.0V RMS
Input Impedance: 20kΩ (balanced)
Signal Output: Main Through OUT
Speaker Output
Speaker Output: 2 x AP4 (1x AP4 bridge)
Features
System setup: Limiter / Short protection
Network: Ethernet: SMNP, Webserver
Power Requirements
Power Connector: 2 x Neutrik PowerCon®
Operating Voltage: 115V / 230V / 250V
Operating Voltage Range: 100 to 120V@60Hz | 205 to 240V@50Hz | 225 to 260V@50Hz
Recommended Amperage: 2 x 20A 115V | 2 x 10A 230V| 2 x 10A 250V
Soft Start: YES
Protection: Thermal breaker
Cooling: 2 x temperature-controlled fans
Physical Dimensions
Height: 177.4 mm (7.0")
Width: 481.4 mm (18.9")
Depth: 455.3 mm (17.9")
Weight: 35 kg (88lbs)
Product code
KVV 987 448 - VHD3200D (250V)
KVV 987 447 - VHD3200D (230V)
KVV 987 446 - VHD3200D (115V)