VHD3200
Subwoofer Amplifier
Power for the VHD subwoofers is provided by the VHD3200 rack-mounted subwoofer amplifier. The unit contains two separate 1600W amplifiers with individual power supplies, signal paths, and I/O within a single four-rack space chassis. The unit acts as a slave for the VHD2000, which provides an audio and control signal. It also functions in the same way for the expansion of an ES series system, taking its feed from the external subwoofer output on an EPAK2500R or an ESR/SL3000 amplifier. The 3200 amplifiers can also run in bridge mode for maximum bass output driving a single VHD2.21 sub.
Features
Two-channel 3200W, Control and Amplification System for use specifically with VHD series subwoofers
Bridge mode facility
Two individual 1600W, high efficiency, current enhancing switching amplifiers with separate Input and output
Two individual transformers and power supply circuits for increased reliability and improved power delivery
Onboard amplifier overdrive protection
AC soft-start circuitry with two individual ON/OFF AC breaker switches providing thorough power protection.
Comprehensive front-to-back cooling system features chassis sealed pcb’s for improved reliability.
Applications
Specifically designed to drive all VHD, ES, SL subwoofer elements as part of the VHDand ES systems in a full rack mount module
Portable PA
Fixed installations
Output Channels
Number of Channels: 2
Out. Power 4Ω - 1 channel / 2 channels loaded: 1600W / 1600W (RMS)
Out. Power 8Ω - bridged: 3200W (RMS)
Low-Frequency Amplifier Specification
Type: High efficiency, Low frequency, Current-enhancing switch mode
Distortion: <0.05%
Operating Bandwidth: 20Hz to 100Hz
Signal Input
Input Sensitivity: 1.0V RMS
Input Impedance: 20kΩ (balanced)
Signal Output: Main Through OUT
Speaker Output
Speaker Output 2 x AP4 (1 x AP4 bridge)
Features
System setup: Limiter / Short protection
Power Requirements
Power Connector: 2 x Neutrik PowerCon®
Operating Voltage: 115V / 230V / 250V
Operating Voltage Range: 100 to 120V@60Hz | 205 to 240V@50Hz | 225 to 260V@50Hz
Recommended Amperage: 2 x 20A 115V | 2 x 10A 230V| 2 x 10A 250V
Soft Start: YES
Protection: Thermal breaker
Cooling: 2 x temperature-controlled fans
Physical Dimensions
Height:Â 177.4 mm (7.0")
Width: 481.4 mm (18.9")
Depth: 455.3 mm (17.9")
Weight: 35 kg (88lbs)
Product code
KVV 987 176 - VHD3200 250V
KVV 987 083 - VHD3200 230V
KVV 987 084 - VHD3200 115V