top of page


2-way Active speaker system

The EX12 further builds on the success of the EX6 and EX10 by implementing the revolutionary 3" NVPD large format compression driver found in our flagship VHD range of products. This makes for one of the most perfectly balanced and accurate, compact, 2-way active boxes available on the market today. Complete onboard control courtesy of electronic crossovers, phase alignment, equalization, and speaker protection are all integrated into the  EX12’s amplifier module.


  • Professional, Baltic birch construction with wear-resistant polymer coating

  • 127dB sustained output, 130dB peak with very high dynamic range and low noise floor

  • 500W of total power with a complete on-board speaker management system

  • 450W high efficiency, current enhancing, switching low-frequency amplifier

  • Very high-quality 50W, low IM distortion, Class AB, high-frequency amplifier with transformer balanced output

  • Compact asymmetrical trapezoidal design allows for use in stage monitor or under-balcony applications with high pass filter to adjust equalization and phase response

  • Wide dispersion 80° H x 40° V horn

  • New state-of-the-art 3" (76 mm) Nitride Titanium diaphragm compression driver with complex geometry phase plug and neodymium magnetic structure for higher output, exceptionally low distortion, and extended frequency response

  • 12" woofer with revolutionary Active Impedance Control (AIC) voice coil technology and neodymium magnetic motor structure dramatically increases force, lowers distortion, and provides increased frequency response linearity

  • Proprietary top and side handle designs for simplified handling and carrying, integrates one M10 hang point, OmniMountTM bracket point, and four M6 bracket points

  • Ten additional M10 suspension points for flexible rigging and installation options

  • Top hat for pole mounting applications

  • LED indicators for signal present, limiter, thermal condition, and power ON status


Designed for the highest quality vocal and full range live performance in medium-size applications

  • Suitable for medium to large conference, Theatre, and small to medium scale concerts

  • Scalable from stand-alone to full range large systems incorporating EX subwoofers

  • Fixed installations

  • Stage monitoring

System Acoustic Performance

Max SPL Long-term: 127dB

Max SPL Peak: 133dB

-3dB Response: 55Hz to 22kHz

-10dB Response: 45Hz to 30kHz

Crossover Point: 1.1kHz

High-Frequency Section

Acoustic Design: Horn Loaded

High Horn Coverage Horizontal / Vertical: 80° x 40°

Rotatable Horn: NO

Throat Exit Diameter / Diaphragm Size: 1.4" / 3"

Diaphragm Material: Nitride Titanium

Magnet Type: Neodymium

High-Frequency Amplifier Specification

Type: Class AB Push-Pull

Rated Continuous Power: 50W

Distortion: <0.05%

Operating Bandwidth: 1.1kHz to 30kHz

Low-Frequency Section

Acoustic DesignFront Loaded, Bass Reflex

Woofer Size / Voice Coil Diameter / Design: 12" / 3.0" / Trans Coil

Magnet Type: Neodymium

Diaphragm Material: Epoxy Reinforced Cellulose

Low-Frequency Amplifier Specification

Type: High efficiency, Current-enhancing switch mode

Rated Continuous Power: 450W

Distortion: <0.05%

Operating Bandwidth: 45Hz to 1.1kHz

Signal Input

Input Sensitivity: 1.0V RMS

Input Impedance: 20 kΩ

Power Requirements

Power Connector: Neutrik PowerCon®

Operating Voltage Range: 100 to 120V@60Hz | 205 to 240V@50Hz | 225 to 260V@50Hz

Recommended Amperage: 6A 115V | 3A 230V | 3A 250V


Cabinet Material: Baltic birch

Handles: 2

Pole Mount: 35 mm

Color: "Orange peeled" Matt Black or any RAL

Physical Dimensions

Height: 596 mm (23.46")

Width: 368 mm (14.49")

Depth: 368 mm (14.49")

Weight: 29 kg (63.8lbs)

Product code

  • KVV 987 095 - EX12 250V

  • KVV 987 059 - EX12 230V

  • KVV 987 060 - EX12 115V

bottom of page