top of page

EX1.2MkII

Active subwoofer system

The EX1.2MkII is a small single 12” active subwoofer system. Employing passive cooling, the EX1.2MkII boasts output that belies its compact, low-profile cabinet size, as with all KV2 Audio products. The enclosure dimensions make it ideal for discreet installations, as it can be installed either horizontally or vertically under seating and in furniture surrounds. Featuring KV2 Audio’s switching amplifier technology,  the EX1.2MkII delivers tight, fast, and controlled bass response at very high output levels from an impressively conservative cabinet footprint.

Features

  • Professional, Baltic birch construction with wear-resistant polymer coating

  • 124dB sustained output, 127dB peak

  • 500W high efficiency, current-enhancing, switching, low-frequency amplifier

  • Passive cooling makes it ideal for discreet installations

  • Complete on-board subwoofer management, including equalization, crossover filters, amplifier overdrive protection, output level, and phase controls

  • Excellent reproduction of bass frequencies with high transient content at high output levels

  • Stereo or Mono inputs with through signal outputs and 120Hz High Pass outputs

  • 12" high output, low-frequency driver with 3" (75 mm) inside/outside, epoxy baked, high temperature, voice coil assembly, and neodymium magnetic structure

  • Two recessed top handles for simplified handling and carrying

  • M20 top hat for pole mounting applications

  • LED indicators for signal present, limiter, thermal condition, and power ON status

Applications

Specifically designed to accompany and compliment the EX6 as a true full-range system

  • For fixed installation

  • Bars, restaurants, and small entertainment projects

  • Small footprint and dimensions allow placement under seating and fixtures

System Acoustic Performance

Max SPL Long-term: 124dB

Max SPL Peak: 130dB

-3dB Response: 38Hz to 120Hz

-10dB Response: 32Hz to 120Hz

Crossover Point: 120Hz

Low-Frequency Section

Acoustic Design: Twin Asymmetrical loading

Woofer Size / Voice Coil Diameter / Design: 12" / 3" / Inside Outside

Magnet Type: Neodymium

Diaphragm Material: Epoxy Reinforced Cellulose

Low-Frequency Amplifier Specification

Type: High efficiency, Current-enhancing switch mode

Rated Continuous Power: 500W

Distortion: <0.05%

Signal Input

Input Sensitivity: 1.0V RMS

Input Impedance: 20kΩ (balanced)

Power Requirements

Power Connector: Neutrik PowerCon®

Operating Voltage: 115V / 230V

Operating Voltage Range: 100 to 120V@60Hz | 205 to 250V@50Hz

Recommended Amperage: 6A 115V | 3A 230V

Cabinet

Cabinet Material: Baltic birch

Handles: 2

Pole Mount: M20

Color: "Orange peeled" Matt Black or any RAL

Physical Dimensions

Height: 370 mm (14.57")

Width: 800 mm (31.49")

Depth: 400 mm (15.75")

Weight: 32 kg (70.5lbs)

​Downloads

Product code

  • KVV 987 359 - EX1.2MkII (115V) 

  • KVV 987 360 - EX1.2MkII (230V) 

bottom of page