ESP4000
Rack-mounted, High Definition Amplifier
The ESP4000 is an ultra-high definition 4-channel rack mountable power amplifier from KV2 Audio, specifically designed for optimised performance with ESD loudspeakers, as well as with other passive systems. For the ESP4000 all electronic circuit boards are first mounted on individual aluminum heat sinks, then on a secondary, internally sealed chassis, this leaves only the heatsink fins exposed. Two separate power supplies ensure increased reliability and continuous delivery of full power. Two shock-mounted fans move air across the fins but never directly across the electronic components. This minimises maintenance cycles and improves the components' lifespan and reliability. The ESP4000 is housed in a professional 4U road rugged steel metal case with aluminum handles and evenly distributed weight.
Features
-
Ultra-high definition
-
4-channel rack mountable power amplifier
-
Specifically designed for optimized performance with ESD loudspeakers, as well as with other passive systems
-
4 x 1000W / 2Ω
-
Two separate power supplies ensure increased reliability and continuous delivery of full power
-
Two shock-mounted fans move air across the fins but never directly across the electronic components. Minimizes maintenance cycles and improves the components' lifespan and reliability
Applications
Designed to drive the ESD and ESM range of passive loudspeaker units with superior sound quality
-
Portable PA
-
Fixed installations
-
Monitor Amplifier
System Acoustic Performance
-1dB Response: 3Hz to 40kHz
Channel Crosstalk: >60dB
Signal to Noise Ratio: >115dB
Total Harmonic Distortion: <0.005% (1W) / <0.01% (clip -1dB)
Output Channels
Amplifier Type: High efficiency, Emitter coupled
Number of Channels: 4
Total Output Power: 4000W
Max. Output Voltage: 78V (peak) per channel
Max. Output Current: 48A (peak) per channel
Minimum load impedance per channel: 2Ω
Out. Power 16Ω - 1 channel / 2 channels loaded: 175W / 160W (RMS)
Out. Power 8Ω - 1 channel / 2 channels loaded: 340W / 300W (RMS)
Out. Power 4Ω - 1 channel / 2 channels loaded: 600W / 500W (RMS)
Out. Power 2Ω - 1 channel / 2 channels loaded: 1000W / 800W (RMS)
Out. Power 16Ω - bridged: 600W (RMS)
Out. Power 8Ω - bridged: 1000W (RMS)
Out. Power 4Ω - bridged: 1600W (RMS), 2000W short term
Signal Input
Input Channels: XLR
Input Sensitivity: 2.0V
Input Impedance: 20kΩ (balanced)
Signal Output: XLR Through
Speaker Input
Speaker Input: - / 4 x Binding posts, Neutrik Speakon®
Features
Input Level Control: -∞ to 0dB
Loudness bass enhancement: +6dB @ 60Hz
RMS Limiter: On / Off
Indicators: Power ON/Thermal, Signal/Limiter
Power Requirements
Power Connector: 2x Neutrik PowerCon®
Operating Voltage: 115V / 230V / 250V
Operating Voltage Range: 100 to 120V@60Hz | 205 to 240V@50Hz | 225 to 260V@50Hz
Recommended Amperage: 2x20A 115V | 2x10A 230V | 2x10A 250V
Soft Start: YES
Protection: Thermal breaker
Cooling: 2x temperature-controlled fans
Physical Dimensions
Height: 177.8 mm (7.0"), 4RU
Width: 481.4 mm (18.95")
Depth: 495 mm (19.5")
Weight: 37.5 kg (82.7lbs)
​Downloads
Product code
-
KVV 987 215 - ESP4000 250V
-
KVV 987 208 - ESP4000 230V
-
KVV 987 214 - ESP4000 115V