ESP2000D
Amplifier with Control & Diagnostics Tool
The ESP2000D is a two-channel rack mountable power amplifier. The unit contains two separate 1000-watt amplifiers, two independent power supplies, (each channel running off each power supply), two signal paths, inputs, and outputs as well as limiting and low-frequency enhancement on each of the two channels within a two-rack unit chassis. It can be used to power any range of passive loudspeakers as well as being specifically designed for optimized performance with KV2 Audio's ESD Series. ESP2000D is now configurable via the front panel or remotely using KV2 Control & Diagnostics Tool.
Features
-
Very high definition
-
2-channel rack mountable power amplifier
-
2 x 1000W / 2Ω
-
Separate power supplies ensure increased reliability and continuous delivery of full power
-
Two shock-mounted fans move air across the fins but never directly across the electronic components. Minimizes maintenance cycles and improves the components' lifespan and reliability
-
Configurable via the front panel or remotely using KV2 Control & Diagnostics Tool
Applications
Designed to drive the ESD and ESM range of passive loudspeaker units with superior sound quality featuring KV2 Control & Diagnostics Tool
-
Portable PA
-
Fixed installations
System Acoustic Performance
-1dB Response: 3Hz to 40kHz
Channel Crosstalk: >70dB
Signal to Noise Ratio: >115dB
Total Harmonic Distortion: <0.005% (1W) / <0.01% (clip -1dB)
Output Channels
Amplifier Type: High Efficiency, Emitter coupled
Number of Channels: 2
Total Output Power: 2000W
Max. Output Voltage: 78V (peak) per channel
Max. Output Current: 48A (peak) per channel
Minimum load impedance per channel: 2Ω
Out. Power 16Ω - 1 channel / 2 channels loaded: 175W / 160W (RMS)
Out. Power 8Ω - 1 channel / 2 channels loaded: 340W / 300W (RMS)
Out. Power 4Ω - 1 channel / 2 channels loaded: 600W / 500W (RMS)
Out. Power 2Ω - 1 channel / 2 channels loaded: 1000W / 800W (RMS)
Out. Power 16Ω - bridged: 600W (RMS)
Out. Power 8Ω - bridged: 1000W (RMS)
Out. Power 4Ω - bridged: 1500W (RMS), 2000W short term
Signal Input
Input Channels: XLR
Input Sensitivity: 1.55V
Input Impedance: 20kΩ (balanced)
Signal Output: XLR Through
Speaker Input
Speaker Input: Neutrik Speakon®, 2x Binding posts
Features
Level Control: -24 to +6 dB
Loudness bass enhancement: +6dB @ 60Hz
RMS Limiter: On / Off
Indicators: Power ON/Thermal, Signal/Limiter
Network: Ethernet: SMNP, Webserver
Power Requirements
Power Connector: Neutrik PowerCon®
Operating Voltage: 115V / 230V / 250V
Operating Voltage Range: 100 to 120V@60Hz | 205 to 240V@50Hz | 225 to 260V@50Hz
Recommended Amperage: 10A 115V | 5A 230V | 5A 250V
Soft Start: YES
Protection: Thermal breaker
Cooling: 2x temperature-controlled fans
Physical Dimensions
Height: 88 mm (3.5"), 2RU
Width: 483 mm (19.00")
Depth: 496 mm (19.5")
Weight: 18,8 kg (41,23 lbs)
​Downloads​
Product code
-
KVV 987 412 - ESP2000D (250V)
-
KVV 987 411 - ESP2000D (230V)
-
KVV 987 410 - ESP2000D (115V)