SL3000D
Amplifier with Control & Diagnostics Tool
The SL3000D Amplifier is a three-way, active control and amplification system specifically designed for the KV2 Audio SL Series modular loudspeaker systems. It houses all signal processing and amplification as well as provides a control for external subwoofer cabinets if needed. (External subwoofers are powered by an external subwoofer amplifier). SL3000D is now configurable via the front panel or remotely using KV2 Control & Diagnostics Tool.
The SL3000D Stereo Amplifier drives and controls one SL412 per channel and follows the typical KV2 holistic approach of matching components with high-quality electronics for true direct performance. All time-alignment, phase correction, and equalization are provided onboard.
Features
The amplifier compliment inside the SL3000D Amplifier is as follows:
High Frequency - 100-watt, Class AB, push-pull, low intermodulation design
Mid Frequency - 200-watt, Class AB, push-pull, low intermodulation design
Bass - 1000-watt, high-efficiency, current-enhancing switch mode technology with Linear Active Filter
Configurable via the front panel or remotely using KV2 Control & Diagnostics Tool.
Applications
Specifically designed as the amplification and control elements for the SL loudspeaker systems in a 4RU mount module with Control & Diagnostics Tool
Fixed Installations
Nightclubs
Multi-use venues
Large bars
Output Channels
Number of Channels:Â 2 (stereo)
Total Output Power: 2 x 1300W
High-Frequency Amplifier Specification
Type: Class AB - Push-Pull - Low IM Design, Transformer balanced output
Rated Continuous Power: 100W
Distortion: <0.02%
Operating Bandwidth: 2.5kHz to 40kHz
Mid Frequency Amplifier Specification
Type: Class AB - Push-Pull - Low IM Design, Transformer balanced output
Rated Continuous Power: 200W
Distortion: <0.02%
Operating Bandwidth: 400Hz to 2,5kHz
Low-Frequency Amplifier Specification
Type: High efficiency, Current-enhancing switch mode
Rated Continuous Power: 1000W
Distortion: <0.02%
Operating Bandwidth: 35Hz to 400Hz
Signal Input
Input Sensitivity: 1.55V RMS
Input Impedance: 20kΩ (balanced)
Speaker Output
Speaker Output: 2 x AP6
Features
Network: Ethernet: SMNP, Webserver
Power Requirements
Power Connector: 2 x Neutrik PowerCon®
Operating Voltage: 115V / 230V / 250V
Operating Voltage Range: 100 to 120V@60Hz | 205 to 240V@50Hz | 225 to 260V@50Hz
Recommended Amperage: 2x10A 115V | 2x5A 230V | 2x5A 250V
Physical Dimensions
Height: 177.8 mm (7.0"), 4RU
Width: 481.4 mm (18.95")
Depth: 495 mm (19.5")
Weight: 39.2 kg (86.62lbs)
Product code
KVV 987 456 - SL3000D (250V)
KVV 987 455 - SL3000D (230V)
KVV 987 454 - SL3000D (115V)