3 - way active-driven mid/high downfill speaker - Left-sided or Right-sided
VHD1.0 L/R
The VHD1.0 downfill enclosure features a single 12" low mid woofer, an 8" transcoil mid-range woofer and the same compression driver as the VHD2.0 on a wide angle 110° horizontal by 40° vertical horn. The rear of the box has been angled for use as a downfill with the VHD2.0. Alternatively as a stand-alone box up to three VHD1.0s can be powered from a single VHD2000 amplifier. Like the VHD2.0, VHD1.0 is available in left and right versions for downfill applications. Designed to be powered as a slave from the VHD2.0 cabinet or directly from the VHD2000 amplifier, all equalization, set up and level are preset providing a plug and play solution for large scale touring and high quality installation.
- Professional Baltic birch construction with wear-resistant polymer coating
- Cut away down angle for correct positioning when flown underneath VHD2.0 cabinet
- Four pieces of fly-track (two per side)
- Very High Definition audio reproduction
- 134dB sustained output, 137dB peak
- Controlled wide dispersion 110° x 40° Mid/High horn with a flat response to 180°
- Revolutionary 3" (76 mm) Nitride Titanium diaphragm compression driver with complex geometry phase plug and neodymium magnetic structure for higher output, exceptionally low distortion and extended frequency response
- 8" Trans-Coil midrange driver, with a 3" (76 mm) voice coil and neodymium magnet for increased control and output with reduced distortion and weight. Horn loaded 12" mid-bass driver with 3" (76 mm) inside/outside, epoxy baked, high temperature voice coil assembly and neodymium magnetic structure
- Three way active requirement - 1000W from the VHD 2000 providing 600W for the 12" Low Mid, 300W for the 8" Midrange and 100W for the High Frequency
- Proprietary side handle design (3) for simplified handling and carrying
- High impact low friction feet, allowing lock- in to other VHD cabinets and easy cabinet movement
- Front locking aluminium VHD wheel boards with wraparound hardwood bumpers
- Weather proofing option and special paint finishes available on request
System Acoustic Performance
Max SPL Long-term 134dB Max SPL Peak 137dB -3dB Response 100Hz to 22kHz -10dB Response 85Hz to 30kHz Full Range mode -3dB Response 65Hz to 22kHz Crossover Point 100Hz, 450Hz, 2.2kHz High Frequency Section
Acoustic Design Horn Loaded High Horn Coverage Horizontal / Vertical 110° x 40° High Frequency Amplifier Requirement 100W (VHD200 amp.) Throat Exit Diameter / Diaphragm Size 1.4" / 3.0" Diaphragm Material Nitride Titanium Magnet Type Neodymium Mid Range Section
Acoustic Design Horn Loaded Mid Horn Coverage Horizontal / Vertical 110° x 40° Midrange Amplifier Requirement 300W (VHD2000 amp.) Woofer Size / Voice Coil Diameter / Design 8" / 3.0" / Trans Coil Diaphragm Material Epoxy Reinforced Cellulose Magnet Type Neodymium Mid Bass Section
Acoustic Design Horn Loaded Mid-bass Amplifier Requirement 600W (VHD2000 amp.) Woofer Size / Voice Coil Diameter / Design 12" / 3" / Inside Outside Diaphragm Material Epoxy Reinforced Cellulose Magnet Type Neodymium Speaker Input
Speaker Input AP6 male Speaker Output
Speaker Output AP6 female Cabinet
Cabinet Material Baltic birch Handles 4 Color Black (wear resistant polymer coating) Physical Dimensions
Height 660 mm (25.98") Width 700 mm (27.55") Depth 495 mm (19.48") Weight 45 kg (99lbs) "In Stock" means in stock at the CZ factory. Items will be shipped via sea from CZ within ten business days from the date of a verified payment. The approximate delivery schedule (including packing, shipping, customs, and transit to the warehouse, is within ninety days from verified payment. The customer is responsible for picking the items up from our warehouse.
