KPAK2600
K-RIG System Amplifier
K-PAK2600 is a three-way, active control and amplification unit specifically designed for the K-RIG Groundstack loudspeaker system. It houses all signal processing and three individual amplifiers in a road-rugged enclosure with built-in cable storage compartment with a suspension system and passive heat sink, along with two demand-sensitive fans for added reliability.
Features
3-way, 2300W Control and Amplification system for use specifically with KT2.0 and KT2.15 speaker cabinets
High Frequency, 200W, Class AB, push-pull, low intermodulation amplifier with transformer-balanced outputs
Mid-frequency, 500W, Class AB, high efficiency, switch mode, low intermodulation design amplifier
Subwoofer, 1600W, high efficiency, current enhancing, switching amplifier
Complete onboard speaker management system, including equalization, time alignment, crossover filters, amplifier overdrive protection, harmonics, and output level controls
AC soft-start circuitry with an ON/OFF AC breaker switch provides thorough power protection
Passive heat dissipation design with a demand-sensitive forced cooling backup system
Removable front cover provides storage for all AC and speaker cables
Bass Character- Attack or extension switch alters the low-frequency character
Includes all speaker cables for a single-stack K-RIG system
Applications
Specifically designed as the amplification and control elements for the K-RIG loudspeaker systems
Portable PA
Dance clubs
Reproduced music
High-Frequency Amplifier Specification
Type: Class AB, Push Pull, Low IM Design, Transformer Balanced Output
Rated Continuous Power: 200W
Distortion: <0.05%
Operating Bandwidth: 1.4kHz to 20kHz
Mid-Frequency Amplifier Specification
Type: Class AB, High Efficiency, Low IM Design, Transformer Balanced Output
Rated Continuous Power: 500W
Distortion: <0.05%
Operating Bandwidth: 180Hz to 1.4kHz
Low-Frequency Amplifier Specification
Type: High efficiency, Low Frequency, Current-enhancing Switch Mode
Rated Continuous Power: 1800W
Distortion: <0.05%
Operating Bandwidth: 20Hz to 200Hz
Signal Input
Input Sensitivity: 1V RMS
Input Impedance: 20kΩ (balanced)
Speaker Output
Speaker Output: Speakon 8pin (Mid/Hi), 4pin (Sub)
Power Requirements
Power Connector: Neutrik PowerCon®
Operating Voltage: 100 to 120V@60Hz | 205 to 240V@50Hz | 225 to 260V@50Hz
Recommended Amperage: 20A 115V | 10A 230V | 10A 250V
Physical Dimensions
Height: 719 mm (28.30")
Width: 478 mm (18.81")
Depth: 305 mm (12.00")
Weight: 38 kg (83.78lbs)
Downloads
Product code
KVV 987 323 - KPAK 115V
KVV 987 317 - KPAK 230V
KVV 987 324 - KPAK 250V