top of page

JK - DI Boxes

Named after company founder and chief engineer, George ‘Jiri’ Krampera, the JK Series of DI Boxes and Audio Tools retain KV2’s philosophy of the best possible signal path from source to speaker. The JK Series consists of the JK1 Single Channel DI, JK2 Stereo DI, JKA Single Channel Acoustic DI with Resonance Notch Filter and the JKP Single Channel Passive DI and Mic Splitter. Also included in the range is the JKT Tone Generator, a useful solution-provider audio tool that will assist every engineer in the tuning and checking of systems and components.

Overview

KV2’s JK series represents the pinnacle in DI technology by o­ffering a higher headroom and lower output impedance than any other DI on the market. This simply means the JK Series can deliver crystal clear, distortion-free audio from the hottest sources without a hint of signal degradation over greater distances. KV2 has optimized the use of phantom power with a special switching power supply on the JK Series to enable an impressive 20 volts of peak power on the internal rails. This allows the JK Series to deliver 50 Ohms on the XLR output, giving true line driver capability, delivering greater audio integrity, and the ability to send high-quality signal four times the distance of its nearest competitor.

All JK Series DI boxes are hand built in the Czech Republic utilizing high quality components and transformers. Full transformer balancing ensures the highest possible signal integrity without interference from RF or ground loops. The heavy-duty steel enclosure provides maximum protection for the electronics and further shielding against external interference. KV2 stands by the build quality of these units with a full 5-year warranty.



JK1

The JK1 features two 1/4" jack inputs with mix or parallel function with a fixed low cut filter and 15dB pad.

JK2

The JK2 features two 1/4" jack inputs with parallel monitor outputs as well as RCA inputs.

JKA

The JKA is a dedicated DI for acoustic instruments. The JKA features a high-impedance 1/4" jack input capable of receiving signal from all types of pick-ups.

JKP

The JKP serves as a universal passive DI box with low output impedance. The JKP features one XLR input and two 1/4" jack inputs in parallel.

JKT

The JKT is the perfect tool for checking and tuning PA systems along with various pieces of equipment.

bottom of page