EX2.5 MkII
Active subwoofer system
The EX2.5MkII is a double 15" subwoofer and the ‘active’ brother of the ES2.6 passive bass module. It provides real depth and power where high bass output is required. The product uses the same low-frequency amplifier found inside the EPAK2500/2500R and features in-built stereo crossovers, high pass outputs, and full overdrive protection. It also features a new speaker level output on an AP4 connector to drive one additional passive ES2.6 subwoofer from its own internal amplifier. (Not to be used with a passive ES2.5)
Features
Professional, Baltic birch construction with wear-resistant polymer coating
137dB sustained output 140dB peak (when used with an ES2.6)
1600W high efficiency, current enhancing, switching low-frequency amplifier
Speaker level AP4 output to drive one additional passive ES2.6 subwoofer
Complete on-board subwoofer management, including equalization, crossover, filters, amplifier overdrive protection, output level, and phase controls
Excellent reproduction of sub bass frequencies with high transient content at high output levels
Stereo or Mono inputs with through signal outputs and 125Hz High Pass outputs
Two 15" high output, low-frequency drivers with 4" (100 mm) inside/outside, epoxy baked, high temperature, voice coil assembly, and magnetic ferrite structures
Four proprietary side handles for simplified handling and carrying
Heavy-duty front grille to work with the innovative new EX2.5 magnetic cart
Acetyl copolymer high impact, low friction feet are located on two sides allowing vertical or horizontal setup and easy cabinet movement. Feet lock into the new ES subwoofers
Six internal corner braces with twelve M10 suspension points M20 top hat for pole mounting applications
LED indicators for signal present, limiter, thermal condition, and power ON status
Applications
Specifically designed to accompany and compliment the EX Mid High speakers to create a true full-range high output system.
Easily incorporated as a system with multiples of any of the EX range
Scalable into multiple-larger systems
Fixed installations
System Acoustic Performance
Max SPL Long-term: 132dB (137dB - with Slave ES2.6)
Max SPL Peak: 138dB (140dB - with Slave ES2.6)
-3dB Response: 38Hz to 125Hz
-10dB Response: 34Hz to 125Hz
Impedance: 8Ω
Crossover Point: 125Hz
Output Channels
Number of Channels: 1
Minimum load impedance per channel: 4Ω
Low-Frequency Section
Acoustic Design: Twin Asymmetrical loading
Woofer Size / Voice Coil Diameter / Design: 2x 15" / 4" / Inside Outside
Diaphragm Material: Epoxy Reinforced Cellulose
Magnet Type: Ferrite
Low-Frequency Amplifier Specification
Type: High efficiency, Low frequency, Current-enhancing switch mode
Rated Continuous Power: 1600W
Distortion: <0.05%
Operating Bandwidth: 34Hz to 125Hz
Signal Input
Input Channels: 2
Input Sensitivity: 1.0V RMS
Input Impedance: 20kΩ (balanced)
Signal Output
Signal Output Channels: Mid/High, Through
Slave Speaker Output: AP4
Features
Input Level Control: -6 to +6dB
Phase: 0° / 180°
RMS Limiter: YES
Indicators: Power ON/Thermal, Limiter
Power Requirements
Power Connector: Neutrik PowerCon®
Output Power Connector: Neutrik PowerCon®
Operating Voltage: 115V / 230V / 250V
Operating Voltage Range: 100 to 120V@60Hz | 205 to 240V@50Hz | 225 to 260V@50Hz
Recommended Amperage: 16A 115V | 8A 230V | 8A 250V
Cabinet
Cabinet Material: Baltic birch
Handles: 4
Pole Mount: M20
Color: "Orange peeled" Matt Black or any RAL
Physical Dimensions
Height: 711.5 mm (28.0")
Width: 602.6 mm (23.72")
Depth: 750 mm (29.52")
Weight: 97 kg (214lbs)
Product code
KVV 987 180 - EX2.5 MkII 250V
KVV 987 179 - EX2.5 MkII 230V
KVV 987 178 - EX2.5 MkII 115V