EX12
2-way Active speaker system
The EX12 further builds on the success of the EX6 and EX10 by implementing the revolutionary 3" NVPD large format compression driver found in our flagship VHD range of products. This makes for one of the most perfectly balanced and accurate, compact, 2-way active boxes available on the market today. Complete onboard control courtesy of electronic crossovers, phase alignment, equalization, and speaker protection are all integrated into the EX12’s amplifier module.
Features
Professional Baltic birch construction with wear-resistant polymer coating
127dB sustained output, 133dB peak with very high dynamic range and low noise floor
500W of total power with a complete on-board speaker management system
450W high efficiency, current enhancing, switching low-frequency amplifier
Very high-quality 50W, low IM distortion, Class AB, high-frequency amplifier with transformer-balanced output
Compact asymmetrical trapezoidal design allows for use in stage monitor or under-balcony applications with high pass filter to adjust equalization and phase response
Wide dispersion 80° H x 40° V horn
New state-of-the-art 3" (76 mm) Nitride Titanium diaphragm compression driver with complex geometry phase plug and neodymium magnetic structure for higher output, exceptionally low distortion, and extended frequency response
12" woofer with revolutionary Active Impedance Control (AIC) voice coil technology and neodymium magnetic motor structure dramatically increases force, lowers distortion, and provides increased frequency response linearity
Proprietary top and side handle designs for simplified handling and carrying, integrates one M10 hang point, OmniMountTM bracket point, and four M6 bracket points
Ten additional M10 suspension points for flexible rigging and installation options
Top hat for pole mounting applications
LED indicators for signal present, limiter, thermal condition, and power ON status
Applications
Designed for the highest quality vocal and full range live performance in medium-size applications
Suitable for medium to large conference, Theatre, and small to medium scale concerts
Scalable from stand-alone to full range large systems incorporating EX subwoofers
Fixed installations
Stage monitoring
System Acoustic Performance
Max SPL Long-term: 127dB
Max SPL Peak: 133dB
-3dB Response: 55Hz to 22kHz
-10dB Response: 45Hz to 30kHz
Crossover Point: 1.1kHz
High-Frequency Section
Acoustic Design: Horn Loaded
High Horn Coverage Horizontal / Vertical: 80° x 40°
Rotatable Horn: NO
Throat Exit Diameter / Diaphragm Size: 1.4" / 3"
Diaphragm Material: Nitride Titanium
Magnet Type: Neodymium
High-Frequency Amplifier Specification
Type: Class AB Push-Pull
Rated Continuous Power: 50W
Distortion: <0.05%
Operating Bandwidth: 1.1kHz to 30kHz
Low-Frequency Section
Acoustic Design: Front Loaded, Bass Reflex
Woofer Size / Voice Coil Diameter / Design: 12" / 3.0" / Trans Coil
Magnet Type: Neodymium
Diaphragm Material: Epoxy Reinforced Cellulose
Low-Frequency Amplifier Specification
Type: High efficiency, Current-enhancing switch mode
Rated Continuous Power: 450W
Distortion: <0.05%
Operating Bandwidth: 45Hz to 1.1kHz
Signal Input
Input Sensitivity: 1.0V RMS
Input Impedance: 20 kΩ
Power Requirements
Power Connector: Neutrik PowerCon®
Operating Voltage Range: 100 to 120V@60Hz | 205 to 240V@50Hz | 225 to 260V@50Hz
Recommended Amperage: 6A 115V | 3A 230V | 3A 250V
Cabinet
Cabinet Material: Baltic birch
Handles: 2
Pole Mount: 35 mm
Color: "Orange peeled" Matt Black or any RAL
Physical Dimensions
Height: 596 mm (23.46")
Width: 368 mm (14.49")
Depth: 368 mm (14.49")
Weight: 29 kg (63.8lbs)
Product code
KVV 987 095 - EX12 250V
KVV 987 059 - EX12 230V
KVV 987 060 - EX12 115V