ESR2600D
Amplifier with Control & Diagnostics
The ESR2600D is a two-channel (stereo) three-way, active control and amplification system specially designed for the KV2 Audio ESR106 full-range loudspeaker system. It houses all signal processing and amplification, as well as provides control and crossover functions for adding external subwoofer cabinets, if required, utilizing external amplifiers. The ESR26000D is now configurable via the front panel or remotely using the KV2 Control & Diagnostics Tool. The ESR2600D incorporates six amplifiers consisting of two 100-watt, Class AB, push-pull, low intermodulation amplifiers for high frequencies, two 200-watt, Class AB, push-pull, low intermodulation design amplifiers for mids, and two 1000-watt, high-efficiency, current-enhancing switching technology amplifiers for bass. The ESR2600D stereo configuration powers two ESR cabinets accordingly.
Features
The amplifier complement inside the ESR2600D Amplifier is as follows:
High Frequency - 2x 100-watt, Class AB, push pull, low intermodulation design
Mid Frequency - 2x 200-watt, Class AB, push pull, low intermodulation design
Low Frequency - 2x 1000-watt, high-efficiency, current-enhancing switching design
Configurable via the front panel or remotely using the KV2 Control & Diagnostics Tool
Applications
Specifically designed as the amplification and control unit for the ESR106 loudspeaker system in a 4RU mount module with integrated Control & Diagnostics.
Fixed Installations
Theatre and Music venues
Houses of worship
Classical and opera concerts
Output Channels
Number of Channels: 2 (stereo)
Total Output Power: 2 x 1300W
High-Frequency Amplifier Specification
Type: Class AB - Push-Pull - Low IM Design, Transformer balanced output
Rated Continuous Power: 200W
Distortion: <0.02%
Operating Bandwidth: 2.4kHz to 40kHz
Mid Frequency Amplifier Specification
Type: High efficiency, Current-enhancing switching design
Rated Continuous Power: 1000W
Distortion: <0.02%
Operating Bandwidth: 20Hz to 450Hz
Low-Frequency Amplifier Specification
Type: High efficiency, Current-enhancing switching design
Rated Continuous Power: 1000W
Distortion: <0.02%
Operating Bandwidth: 20Hz to 450Hz
Signal Input
Input Sensitivity: 1.55V RMS
Input Impedance: 20kΩ (balanced)
Speaker Output
Speaker Output: 2 x AP6 female
Features
Network: Ethernet: SMNP, Webserver
Power Requirements
Power Connector: 2 x Neutrik PowerCon®
Operating Voltage: 115V / 230V / 250V
Operating Voltage Range: 100 to 120V@60Hz | 205 to 240V@50Hz | 225 to 260V@50Hz
Recommended Amperage: 2x10A 115V | 2x5A 230V | 2x5A 250V
Physical Dimensions
Height: 177 mm (6.97"), 4RU
Width: 481.4 mm (18.95")
Depth: 455.3 mm (17.93")
Weight: 36 kg (79.37lbs)
Product code
KVV 987 514 (250V)
KVV 987 513 (230V)
KVV 987 512 (115V)