top of page

VHD5100

Amplifier for Downfill

The VHD5100 is a two-channel, three-way, active control, and amplification system specially designed for the KV2 Audio VHD5.1 Downfill and ESR215MkII loudspeaker system. It houses all signal processing and amplification, as well as providing control and crossover function if needed utilizing a Fill channel external subwoofer. Each channel incorporates three amplifiers consisting of a 100-watt, Class AB, push-pull, low intermodulation amplifier for high frequencies, 200-watt, Class AB, push-pull, low intermodulation design for mids, and a 1000-watt, high-efficiency, current-enhancing switch mode technology amplifiers for bass.

Features

3 amplifier modules consisting of:

  • 100-watt, Class AB, push-pull, low intermodulation amplifier for high frequencies

  • 200-watt, Class AB, push-pull, low intermodulation design for mids 

  • 1000-watt, high-efficiency, current-enhancing switch mode technology amplifiers for bass

Applications

Specifially designed as the amplifiation and control unit for powering the 1x VHD5.1 Downfill and 1x ESR215MkII as a general use Fill module

  • Large scale Portable PA

  • Fixed installations

  • Large clubs

Output Channels

Number of Channels: 2 (Fill + DownFill)

Total Output Power: 2x 1300W

High-Frequency Amplifier Specification

Type: Class AB - Push-Pull - Low IM Design, Transformer balanced output

Rated Continuous Power: 100W

Distortion: <0.02%

Operating Bandwidth: 2,5kHz to 40kHz

Mid Frequency Amplifier Specification

Type: Class AB - Push-Pull - Low IM Design, Transformer balanced output

Rated Continuous Power: 200W

Distortion: <0.02%

Operating Bandwidth: 400Hz to 2,5kHz

Low-Frequency Amplifier Specification

Type: High efficiency, Current-enhancing switch mode

Rated Continuous Power: 1000W

Distortion: <0.02%

Operating Bandwidth: 10Hz to 400Hz

Signal Input

Input Sensitivity Fill: 1.55V RMS (+8dB / -10dB)

Input Impedance: 20kΩ (balanced)

Input Sensitivity Downfill: 1.55V RMS

Speaker Output

Speaker Output: 2 x AP6 female

Power Requirements

Power Connector: 2 x Neutrik PowerCon®

Operating Voltage: 115V / 230V / 250V

Operating Voltage Range: 100 to 120V@60Hz | 205 to 240V@50Hz |225 to 260V@50Hz

Recommended Amperage: 2x10A 115V | 2x5A 230V | 2x5A 250V

Physical Dimensions

Height: 177.8 mm (7.0"), 4RU

Width: 481.4 mm (18.95")

Depth: 455.3 mm (17.93")

Weight: 39 kg (86lbs)

Product code

  • KVV 987 438 - VHD5100 - (230V)

bottom of page