top of page


LOW-MID Power Module

The VHD5000S is a rack-mounted, high efficiency, low/mid amplifier specifically designed in conjunction with VHD5000 for powering the VHD5 low/mid loudspeaker system. The unit contains two separate 2500 watt amplifiers with individual power supplies, signal paths and inputs and outputs within a single-four rack space chassis. The unit acts as a slave for the VHD5000, which provides audio and control signal.



Specifically designed as the amplification and control unit for powering the 1xLow/Mid VHD5.0 part and 3x VHD8.10 loudspeakers in a rack mount modules

  • Large scale Portable PA

  • Fixed installations

  • Large clubs

Output Channels

Number of Channels: 2

Mid Bass Frequency Amplifier Specification

Type: High efficiency, Low frequency, High current

Rated Continuous Power: 2500W

Min. Load Impedance: 2Ω

Distortion: <0.05%

Operating Bandwidth: 20Hz to 450Hz

Signal Input

Input Channels: XLR

Input Sensitivity: 1.0V RMS

Input Impedance: 10kΩ

Signal Output

Output channels: Through Out

Speaker Output

Speaker Output: 2x AP4


Indicators: 2 x Power ON/Thermal, Signal/Limiter/Communication

Remote control: Internal RS485

Power Requirements

Power Connector: 2 x Neutrik PowerCon® 32A

Operating Voltage: 230V

Operating Voltage Range: 195 to 260V AC

Recommended Amperage: 2x20A 205V | 2x16A 230V

Soft Start: Yes

Protection: Thermal breaker

Cooling: Front-to-back, active

Physical Dimensions

Height: 177.8 mm (7.0"), 4HE

Width: 481.4 mm (18.95")

Depth: 495 mm (19.5")

Weight: 42 kg (92.6lbs)

Product code

  • KVV 987 356

bottom of page