VHD1.0
Mid-High Down-fill Enclosure
The VHD1.0 downfill enclosure features a single 12" low mid-woofer, an 8" transcoil mid-range woofer, and the same compression driver as the VHD2.0 on a wide angle 110° horizontal by 40° vertical horn. The rear of the box has been angled for use as a downfill with the VHD2.0. Alternatively, as a stand-alone box up to three VHD1.0s can be powered from a single VHD2000 amplifier. Like the VHD2.0, VHD1.0 is available in left and right versions for downfill applications. Designed to be powered as a slave from the VHD2.0 cabinet or directly from the VHD2000 amplifier, all equalization, set up and level are preset providing a plug-and-play solution for large scale touring and high-quality installation.
Features
Professional Baltic birch construction with a wear-resistant polymer coating
Cutaway down angle for correct positioning when flown underneath the VHD2.0 cabinet
Four pieces of fly-track (two per side)
Very High Definition audio reproduction
134dB sustained output, 137dB peak
Controlled wide dispersion 110° x 40° Mid/High horn with a flat response to 180°
Revolutionary 3" (76 mm) Nitride Titanium diaphragm compression driver with complex geometry phase plug and neodymium magnetic structure for higher output, exceptionally low distortion, and extended frequency response
8" Trans-Coil midrange driver, with a 3" (76 mm) voice coil and neodymium magnet for increased control and output with reduced distortion and weight. Horn-loaded 12" mid-bass driver with 3" (76 mm) inside/outside, epoxy baked, high-temperature voice coil assembly, and neodymium magnetic structure
Three-way active requirement - 1000W from the VHD 2000 providing 600W for the 12" Low Mid, 300W for the 8" Midrange, and 100W for the High Frequency
Proprietary side handle design (3) for simplified handling and carrying
High impact low friction feet, allowing lock-into other VHD cabinets and easy cabinet movement
Front locking aluminum VHD wheel boards with wraparound hardwood bumpers
Weatherproofing option and special paint finishes available on request
Applications
Designed as a true mid-high downfill enclosure to accompany the VHD2.0 as part of the VHD systems
Medium to large concert venues
Fixed installation
Outdoor events
System Acoustic Performance
Max SPL Long-term:Â 134dB
Max SPL Peak: 137dB
-3dB Response: 100Hz to 22kHz
-10dB Response: 85Hz to 30kHz
Full Range mode:Â -3dB Response65Hz to 22kHz
Crossover Point: 100Hz, 450Hz, 2.2kHz
High-Frequency Section
Acoustic Design: Horn Loaded
High Horn Coverage Horizontal / Vertical: 110° x 40°
High-Frequency Amplifier Requirement: 100W (VHD200 amp.)
Throat Exit Diameter / Diaphragm Size: 1.4" / 3.0"
Diaphragm Material: Nitride Titanium
Magnet Type: Neodymium
Mid Range Section
Acoustic Design: Horn Loaded
Mid Horn Coverage Horizontal / Vertical: 110° x 40°
Midrange Amplifier Requirement: 300W (VHD2000 amp.)
Woofer Size / Voice Coil Diameter / Design: 8" / 3.0" / Trans Coil
Diaphragm Material: Epoxy Reinforced Cellulose
Magnet Type: Neodymium
Mid Bass Section
Acoustic Design: Horn Loaded
Mid-bass Amplifier Requirement: 600W (VHD2000 amp.)
Woofer Size / Voice Coil Diameter / Design: 12" / 3" / Inside Outside
Diaphragm Material: Epoxy Reinforced Cellulose
Magnet Type: Neodymium
Speaker Input
Speaker Input: AP6 male
Speaker Output
Speaker Output: AP6 female
Cabinet
Cabinet Material: Baltic birch
Handles: 4
Color: Black (wear-resistant polymer coating)
Physical Dimensions
Height: 660 mm (25.98")
Width: 700 mm (27.55")
Depth: 495 mm (19.48")
Weight: 45 kg (99lbs)
Product code
KVV 987 141 - VHD1.0 R (right)
KVV 987 076 - VHD1.0 L (left)