top of page

SL3000D

Amplifier with Control & Diagnostics Tool

The SL3000D Amplifier is a three-way, active control and amplification system specifically designed for the KV2 Audio SL Series modular loudspeaker systems. It houses all signal processing and amplification as well as provides a control for external subwoofer cabinets if needed. (External subwoofers are powered by an external subwoofer amplifier). SL3000D is now configurable via the front panel or remotely using KV2 Control & Diagnostics Tool.

The SL3000D Stereo Amplifier drives and controls one SL412 per channel and follows the typical KV2 holistic approach of matching components with high-quality electronics for true direct performance. All time-alignment, phase correction, and equalization are provided onboard.

Features

  • The amplifier compliment inside the SL3000D Amplifier is as follows:

  • High Frequency - 100-watt, Class AB, push-pull, low intermodulation design

  • Mid Frequency - 200-watt, Class AB, push-pull, low intermodulation design

  • Bass - 1000-watt, high-efficiency, current-enhancing switch mode technology with Linear Active Filter

  • Configurable via the front panel or remotely using KV2 Control & Diagnostics Tool.

Applications

Specifically designed as the amplification and control elements for the SL loudspeaker systems in a 4RU mount module with Control & Diagnostics Tool

  • Fixed Installations

  • Nightclubs

  • Multi-use venues

  • Large bars

Output Channels

Number of Channels2 (stereo)

Total Output Power: 2 x 1300W

High-Frequency Amplifier Specification

Type: Class AB - Push-Pull - Low IM Design, Transformer balanced output

Rated Continuous Power: 100W

Distortion: <0.02%

Operating Bandwidth: 2.5kHz to 40kHz

Mid Frequency Amplifier Specification

Type: Class AB - Push-Pull - Low IM Design, Transformer balanced output

Rated Continuous Power: 200W

Distortion: <0.02%

Operating Bandwidth: 400Hz to 2,5kHz

Low-Frequency Amplifier Specification

Type: High efficiency, Current-enhancing switch mode

Rated Continuous Power: 1000W

Distortion: <0.02%

Operating Bandwidth: 35Hz to 400Hz

Signal Input

Input Sensitivity: 1.55V RMS

Input Impedance: 20kΩ (balanced)

Speaker Output

Speaker Output: 2 x AP6

Features

Network: Ethernet: SMNP, Webserver

Power Requirements

Power Connector: 2 x Neutrik PowerCon®

Operating Voltage: 115V / 230V / 250V

Operating Voltage Range: 100 to 120V@60Hz | 205 to 240V@50Hz | 225 to 260V@50Hz

Recommended Amperage: 2x10A 115V | 2x5A 230V | 2x5A 250V

Physical Dimensions

Height: 177.8 mm (7.0"), 4RU

Width: 481.4 mm (18.95")

Depth: 495 mm (19.5")

Weight: 39.2 kg (86.62lbs)

Product code

  • KVV 987 456 - SL3000D (250V)

  • KVV 987 455 - SL3000D (230V)

  • KVV 987 454 - SL3000D (115V)

bottom of page