top of page

ESR 2600 D

Amplifier with Control & Diagnostics

The ESR2600D is a two-channel (stereo) three-way, active control and amplification system specially designed for the KV2 Audio ESR106 full-range loudspeaker system. It houses all signal processing and amplification, as well as provides control and crossover functions for adding external subwoofer cabinets, if required, utilizing external amplifiers. The ESR26000D is now configurable via the front panel or remotely using the KV2 Control & Diagnostics Tool. The ESR2600D incorporates six amplifiers consisting of two 100-watt, Class AB, push-pull, low intermodulation amplifiers for high frequencies, two 200-watt, Class AB, push-pull, low intermodulation design amplifiers for mids, and two 1000-watt, high-efficiency, current-enhancing switching technology amplifiers for bass. The ESR2600D stereo configuration powers two ESR cabinets accordingly.

Features

  • The amplifier complement inside the ESR2600D Amplifier is as follows:

  • High Frequency - 2x 100-watt, Class AB, push pull, low intermodulation design

  • Mid Frequency - 2x 200-watt, Class AB, push pull, low intermodulation design

  • Low Frequency - 2x 1000-watt, high-efficiency, current-enhancing switching design

  • Configurable via the front panel or remotely using the KV2 Control & Diagnostics Tool

Applications

Specifically designed as the amplification and control unit for the ESR106 loudspeaker system in a 4RU mount module with integrated Control & Diagnostics.

  • Fixed Installations

  • Theatre and Music venues

  • Houses of worship

  • Classical and opera concerts

Output Channels

Number of Channels: 2 (stereo)

Total Output Power: 2 x 1300W

High-Frequency Amplifier Specification

Type: Class AB - Push-Pull - Low IM Design, Transformer balanced output

Rated Continuous Power: 200W

Distortion: <0.02%

Operating Bandwidth: 2.4kHz to 40kHz

Mid Frequency Amplifier Specification

Type: High efficiency, Current-enhancing switching design

Rated Continuous Power: 1000W

Distortion: <0.02%

Operating Bandwidth: 20Hz to 450Hz

Low-Frequency Amplifier Specification

Type: High efficiency, Current-enhancing switching design

Rated Continuous Power: 1000W

Distortion: <0.02%

Operating Bandwidth: 20Hz to 450Hz

Signal Input

Input Sensitivity: 1.55V RMS

Input Impedance: 20kΩ (balanced)

Speaker Output

Speaker Output: 2 x AP6 female

Features

Network: Ethernet: SMNP, Webserver

Power Requirements

Power Connector: 2 x Neutrik PowerCon®

Operating Voltage: 115V / 230V / 250V

Operating Voltage Range: 100 to 120V@60Hz | 205 to 240V@50Hz | 225 to 260V@50Hz

Recommended Amperage: 2x10A 115V | 2x5A 230V | 2x5A 250V

Physical Dimensions

Height: 177 mm (6.97"), 4RU

Width: 481.4 mm (18.95")

Depth: 455.3 mm (17.93")

Weight: 36 kg (79.37lbs)

Product code

  • KVV 987 514 (250V)

  • KVV 987 513 (230V)

  • KVV 987 512 (115V)

bottom of page