EX1.2MkII
Active subwoofer system
The EX1.2MkII is a small single 12” active subwoofer system. Employing passive cooling, the EX1.2MkII boasts output that belies its compact, low-profile cabinet size, as with all KV2 Audio products. The enclosure dimensions make it ideal for discreet installations, as it can be installed either horizontally or vertically under seating and in furniture surrounds. Featuring KV2 Audio’s switching amplifier technology, the EX1.2MkII delivers tight, fast, and controlled bass response at very high output levels from an impressively conservative cabinet footprint.
Features
Professional, Baltic birch construction with wear-resistant polymer coating
124dB sustained output, 127dB peak
500W high efficiency, current-enhancing, switching, low-frequency amplifier
Passive cooling makes it ideal for discreet installations
Complete on-board subwoofer management, including equalization, crossover filters, amplifier overdrive protection, output level, and phase controls
Excellent reproduction of bass frequencies with high transient content at high output levels
Stereo or Mono inputs with through signal outputs and 120Hz High Pass outputs
12" high output, low-frequency driver with 3" (75 mm) inside/outside, epoxy baked, high temperature, voice coil assembly, and neodymium magnetic structure
Two recessed top handles for simplified handling and carrying
M20 top hat for pole mounting applications
LED indicators for signal present, limiter, thermal condition, and power ON status
Applications
Specifically designed to accompany and compliment the EX6 as a true full-range system
For fixed installation
Bars, restaurants, and small entertainment projects
Small footprint and dimensions allow placement under seating and fixtures
System Acoustic Performance
Max SPL Long-term: 124dB
Max SPL Peak: 130dB
-3dB Response: 38Hz to 120Hz
-10dB Response: 32Hz to 120Hz
Crossover Point: 120Hz
Low-Frequency Section
Acoustic Design: Twin Asymmetrical loading
Woofer Size / Voice Coil Diameter / Design: 12" / 3" / Inside Outside
Magnet Type: Neodymium
Diaphragm Material: Epoxy Reinforced Cellulose
Low-Frequency Amplifier Specification
Type: High efficiency, Current-enhancing switch mode
Rated Continuous Power: 500W
Distortion: <0.05%
Signal Input
Input Sensitivity: 1.0V RMS
Input Impedance: 20kΩ (balanced)
Power Requirements
Power Connector: Neutrik PowerCon®
Operating Voltage: 115V / 230V
Operating Voltage Range: 100 to 120V@60Hz | 205 to 250V@50Hz
Recommended Amperage: 6A 115V | 3A 230V
Cabinet
Cabinet Material: Baltic birch
Handles: 2
Pole Mount: M20
Color: "Orange peeled" Matt Black or any RAL
Physical Dimensions
Height: 370 mm (14.57")
Width: 800 mm (31.49")
Depth: 400 mm (15.75")
Weight: 32 kg (70.5lbs)
Product code
KVV 987 359 - EX1.2MkII (115V)
KVV 987 360 - EX1.2MkII (230V)